1.1. What is NCURSES?

You might be wondering, what the import of all this technical gibberish is. In the above scenario, every application program is supposed to query the terminfo and perform the necessary stuff (sending control characters etc.). It soon became difficult to manage this complexity and this gave birth to 'CURSES'. Curses is a pun on the name "cursor optimization". The Curses library forms a wrapper over working with raw terminal codes, and provides highly flexible and efficient API (Application Programming Interface). It provides functions to move the cursor, create windows, produce colors, play with mouse etc. The application programs need not worry about the underlying terminal capabilities.

So what is NCURSES? NCURSES is a clone of the original System V Release 4.0 (SVr4) curses. It is a freely distributable library, fully compatible with older version of curses. In short, it is a library of functions that manages an application's display on character-cell terminals. In the remainder of the document, the terms curses and ncurses are used interchangeably.

A detailed history of NCURSES can be found in the NEWS file from the source distribution. The current package is maintained by Thomas Dickey. You can contact the maintainers at bug-ncurses@gnu.org.

1.2. What we can do with NCURSES

NCURSES not only creates a wrapper over terminal capabilities, but also gives a robust framework to create nice looking UI (User Interface)s in text mode. It provides functions to create windows etc. Its sister libraries panel, menu and form provide an extension to the basic curses library. These libraries usually come along with curses. One can create applications that contain multiple windows, menus, panels and forms. Windows can be managed independently, can provide 'scrollability' and even can be hidden.

Menus provide the user with an easy command selection option. Forms allow the creation of easy-to-use data entry and display windows. Panels extend the capabilities of ncurses to deal with overlapping and stacked windows.

These are just some of the basic things we can do with ncurses. As we move along, We will see all the capabilities of these libraries.

1.3. Where to get it

All right, now that you know what you can do with ncurses, you must be rearing to get started. NCURSES is usually shipped with your installation. In case you don't have the library or want to compile it on your own, read on.

Compiling the package

NCURSES can be obtained from ftp://ftp.gnu.org/pub/gnu/ncurses/ncurses.tar.gz or any of the ftp sites mentioned in http://www.gnu.org/order/ftp.html.

Read the README and INSTALL files for details on to how to install it. It usually involves the following operations.

    tar zxvf ncurses<version>.tar.gz  # unzip and untar the archive
    cd ncurses<version>               # cd to the directory
    ./configure                             # configure the build according to your 
                                            # environment
    make                                    # make it
    su root                                 # become root
    make install                            # install it

Using the RPM

NCURSES RPM can be found and downloaded from http://rpmfind.net . The RPM can be installed with the following command after becoming root.

    rpm -i <downloaded rpm>

1.4. Purpose/Scope of the document

This document is intended to be a "All in One" guide for programming with ncurses and its sister libraries. We graduate from a simple "Hello World" program to more complex form manipulation. No prior experience in ncurses is assumed. The writing is informal, but a lot of detail is provided for each of the examples.

1.5. About the Programs

All the programs in the document are available in zipped form here. Unzip and untar it. The directory structure looks like this.

ncurses
   |
   |----> JustForFun     -- just for fun programs
   |----> basics         -- basic programs
   |----> demo           -- output files go into this directory after make
   |          |
   |          |----> exe -- exe files of all example programs
   |----> forms          -- programs related to form library
   |----> menus          -- programs related to menus library
   |----> panels         -- programs related to panels library
   |----> perl           -- perl equivalents of the examples (contributed
   |                            by Anuradha Ratnaweera)
   |----> Makefile       -- the top level Makefile
   |----> README         -- the top level README file. contains instructions
   |----> COPYING        -- copyright notice

The individual directories contain the following files.

Description of files in each directory
--------------------------------------
JustForFun
    |
    |----> hanoi.c   -- The Towers of Hanoi Solver
    |----> life.c    -- The Game of Life demo
    |----> magic.c   -- An Odd Order Magic Square builder 
    |----> queens.c  -- The famous N-Queens Solver
    |----> shuffle.c -- A fun game, if you have time to kill
    |----> tt.c      -- A very trivial typing tutor

  basics
    |
    |----> acs_vars.c            -- ACS_ variables example
    |----> hello_world.c         -- Simple "Hello World" Program
    |----> init_func_example.c   -- Initialization functions example
    |----> key_code.c            -- Shows the scan code of the key pressed
    |----> mouse_menu.c          -- A menu accessible by mouse
    |----> other_border.c        -- Shows usage of other border functions apa
    |                               -- rt from box()
    |----> printw_example.c      -- A very simple printw() example
    |----> scanw_example.c       -- A very simple getstr() example
    |----> simple_attr.c         -- A program that can print a c file with 
    |                               -- comments in attribute
    |----> simple_color.c        -- A simple example demonstrating colors
    |----> simple_key.c          -- A menu accessible with keyboard UP, DOWN 
    |                               -- arrows
    |----> temp_leave.c          -- Demonstrates temporarily leaving curses mode
    |----> win_border.c          -- Shows Creation of windows and borders
    |----> with_chgat.c          -- chgat() usage example

  forms 
    |
    |----> form_attrib.c     -- Usage of field attributes
    |----> form_options.c    -- Usage of field options
    |----> form_simple.c     -- A simple form example
    |----> form_win.c        -- Demo of windows associated with forms

  menus 
    |
    |----> menu_attrib.c     -- Usage of menu attributes
    |----> menu_item_data.c  -- Usage of item_name() etc.. functions
    |----> menu_multi_column.c    -- Creates multi columnar menus
    |----> menu_scroll.c     -- Demonstrates scrolling capability of menus
    |----> menu_simple.c     -- A simple menu accessed by arrow keys
    |----> menu_toggle.c     -- Creates multi valued menus and explains
    |                           -- REQ_TOGGLE_ITEM
    |----> menu_userptr.c    -- Usage of user pointer
    |----> menu_win.c        -- Demo of windows associated with menus

  panels 
    |
    |----> panel_browse.c    -- Panel browsing through tab. Usage of user 
    |                           -- pointer
    |----> panel_hide.c      -- Hiding and Un hiding of panels
    |----> panel_resize.c    -- Moving and resizing of panels
    |----> panel_simple.c    -- A simple panel example

  perl
    |----> 01-10.pl          -- Perl equivalents of first ten example programs

There is a top level Makefile included in the main directory. It builds all the files and puts the ready-to-use exes in demo/exe directory. You can also do selective make by going into the corresponding directory. Each directory contains a README file explaining the purpose of each c file in the directory.

For every example, I have included path name for the file relative to the examples directory.

If you prefer browsing individual programs, point your browser to http://tldp.org/HOWTO/NCURSES-Programming-HOWTO/ncurses_programs/

All the programs are released under the same license that is used by ncurses (MIT-style). This gives you the ability to do pretty much anything other than claiming them as yours. Feel free to use them in your programs as appropriate.

1.6. Other Formats of the document

This howto is also availabe in various other formats on the tldp.org site. Here are the links to other formats of this document.

1.7. Credits

I thank Sharath and Emre Akbas for helping me with few sections. The introduction was initially written by sharath. I rewrote it with few excerpts taken from his initial work. Emre helped in writing printw and scanw sections.

Perl equivalents of the example programs are contributed by Anuradha Ratnaweera.

Then comes Ravi Parimi, my dearest friend, who has been on this project before even one line was written. He constantly bombarded me with suggestions and patiently reviewed the whole text. He also checked each program on Linux and Solaris.

1.8. Wish List

This is the wish list, in the order of priority. If you have a wish or you want to work on completing the wish, mail me.

• Add examples to last parts of forms section.

• Prepare a Demo showing all the programs and allow the user to browse through description of each program. Let the user compile and see the program in action. A dialog based interface is preferred.

• Add debug info. _tracef, _tracemouse stuff.

• Accessing termcap, terminfo using functions provided by ncurses package.

• Working on two terminals simultaneously.

• Add more stuff to miscellaneous section.

1.9. Copyright

Copyright © 2001 by Pradeep Padala.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization.

2.1. Compiling With the NCURSES Library

To use ncurses library functions, you have to include ncurses.h in your programs. To link the program with ncurses the flag -lncurses should be added.

    #include <ncurses.h>
    .
    .
    .

    compile and link: gcc <program file> -lncurses

#include <ncurses.h>

int main()
{	
	initscr();			/* Start curses mode 		  */
	printw("Hello World !!!");	/* Print Hello World		  */
	refresh();			/* Print it on to the real screen */
	getch();			/* Wait for user input */
	endwin();			/* End curses mode		  */

	return 0;
}

2.2. Dissection

The above program prints "Hello World !!!" to the screen and exits. This program shows how to initialize curses and do screen manipulation and end curses mode. Let's dissect it line by line.

4.1. Initialization functions

4.2. raw() and cbreak()

Normally the terminal driver buffers the characters a user types until a new line or carriage return is encountered. But most programs require that the characters be available as soon as the user types them. The above two functions are used to disable line buffering. The difference between these two functions is in the way control characters like suspend (CTRL-Z), interrupt and quit (CTRL-C) are passed to the program. In the raw() mode these characters are directly passed to the program without generating a signal. In the cbreak() mode these control characters are interpreted as any other character by the terminal driver. I personally prefer to use raw() as I can exercise greater control over what the user does.

4.3. echo() and noecho()

These functions control the echoing of characters typed by the user to the terminal. noecho() switches off echoing. The reason you might want to do this is to gain more control over echoing or to suppress unnecessary echoing while taking input from the user through the getch() etc. functions. Most of the interactive programs call noecho() at initialization and do the echoing of characters in a controlled manner. It gives the programmer the flexibility of echoing characters at any place in the window without updating current (y,x) co-ordinates.

4.4. keypad()

This is my favorite initialization function. It enables the reading of function keys like F1, F2, arrow keys etc. Almost every interactive program enables this, as arrow keys are a major part of any User Interface. Do keypad(stdscr, TRUE) to enable this feature for the regular screen (stdscr). You will learn more about key management in later sections of this document.

4.5. halfdelay()

This function, though not used very often, is a useful one at times. halfdelay()is called to enable the half-delay mode, which is similar to the cbreak() mode in that characters typed are immediately available to program. However, it waits for 'X' tenths of a second for input and then returns ERR, if no input is available. 'X' is the timeout value passed to the function halfdelay(). This function is useful when you want to ask the user for input, and if he doesn't respond with in certain time, we can do some thing else. One possible example is a timeout at the password prompt.

4.6. Miscellaneous Initialization functions

There are few more functions which are called at initialization to customize curses behavior. They are not used as extensively as those mentioned above. Some of them are explained where appropriate.

4.7. An Example

Let's write a program which will clarify the usage of these functions.

#include <ncurses.h>

int main()
{	int ch;

	initscr();			/* Start curses mode 		*/
	raw();				/* Line buffering disabled	*/
	keypad(stdscr, TRUE);		/* We get F1, F2 etc..		*/
	noecho();			/* Don't echo() while we do getch */

    	printw("Type any character to see it in bold\n");
	ch = getch();			/* If raw() hadn't been called
					 * we have to press enter before it
					 * gets to the program 		*/
	if(ch == KEY_F(1))		/* Without keypad enabled this will */
		printw("F1 Key pressed");/*  not get to us either	*/
					/* Without noecho() some ugly escape
					 * charachters might have been printed
					 * on screen			*/
	else
	{	printw("The pressed key is ");
		attron(A_BOLD);
		printw("%c", ch);
		attroff(A_BOLD);
	}
	refresh();			/* Print it on to the real screen */
    	getch();			/* Wait for user input */
	endwin();			/* End curses mode		  */

	return 0;
}

This program is self-explanatory. But I used functions which aren't explained yet. The function getch() is used to get a character from user. It is equivalent to normal getchar() except that we can disable the line buffering to avoid <enter> after input. Look for more about getch()and reading keys in the key management section . The functions attron and attroff are used to switch some attributes on and off respectively. In the example I used them to print the character in bold. These functions are explained in detail later.

6.1. addch() class of functions

These functions put a single character into the current cursor location and advance the position of the cursor. You can give the character to be printed but they usually are used to print a character with some attributes. Attributes are explained in detail in later sections of the document. If a character is associated with an attribute(bold, reverse video etc.), when curses prints the character, it is printed in that attribute.

In order to combine a character with some attributes, you have two options:

• By OR'ing a single character with the desired attribute macros. These attribute macros could be found in the header file ncurses.h. For example, you want to print a character ch(of type char) bold and underlined, you would call addch() as below.

  addch(ch | A_BOLD | A_UNDERLINE);

• By using functions like attrset(),attron(),attroff(). These functions are explained in the Attributes section. Briefly, they manipulate the current attributes of the given window. Once set, the character printed in the window are associated with the attributes until it is turned off.

Additionally, curses provides some special characters for character-based graphics. You can draw tables, horizontal or vertical lines, etc. You can find all avaliable characters in the header file ncurses.h. Try looking for macros beginning with ACS_ in this file.

6.2. mvaddch(), waddch() and mvwaddch()

mvaddch() is used to move the cursor to a given point, and then print. Thus, the calls:

move(row,col); /* moves the cursor to rowth row and colth column */ addch(ch);

can be replaced by

mvaddch(row,col,ch);

waddch() is similar to addch(), except that it adds a character into the given window. (Note that addch() adds a character into the window stdscr.)

In a similar fashion mvwaddch() function is used to add a character into the given window at the given coordinates.

Now, we are familiar with the basic output function addch(). But, if we want to print a string, it would be very annoying to print it character by character. Fortunately, ncurses provides printf-like or puts-like functions.

6.3. printw() class of functions

These functions are similar to printf() with the added capability of printing at any position on the screen.

#include <ncurses.h>			/* ncurses.h includes stdio.h */  
#include <string.h> 
 
int main()
{
 char mesg[]="Just a string";		/* message to be appeared on the screen */
 int row,col;				/* to store the number of rows and *
					 * the number of colums of the screen */
 initscr();				/* start the curses mode */
 getmaxyx(stdscr,row,col);		/* get the number of rows and columns */
 mvprintw(row/2,(col-strlen(mesg))/2,"%s",mesg);
                                	/* print the message at the center of the screen */
 mvprintw(row-2,0,"This screen has %d rows and %d columns\n",row,col);
 printw("Try resizing your window(if possible) and then run this program again");
 refresh();
 getch();
 endwin();

 return 0;
}

6.4. addstr() class of functions

addstr() is used to put a character string into a given window. This function is similar to calling addch() once for each character in a given string. This is true for all output functions. There are other functions from this family such as mvaddstr(),mvwaddstr() and waddstr(), which obey the naming convention of curses.(e.g. mvaddstr() is similar to the respective calls move() and then addstr().) Another function of this family is addnstr(), which takes an integer parameter(say n) additionally. This function puts at most n characters into the screen. If n is negative, then the entire string will be added.

6.5. A word of caution

All these functions take y co-ordinate first and then x in their arguments. A common mistake by beginners is to pass x,y in that order. If you are doing too many manipulations of (y,x) co-ordinates, think of dividing the screen into windows and manipulate each one separately. Windows are explained in the windows section.

7.1. getch() class of functions

These functions read a single character from the terminal. But there are several subtle facts to consider. For example if you don't use the function cbreak(), curses will not read your input characters contiguously but will begin read them only after a new line or an EOF is encountered. In order to avoid this, the cbreak() function must used so that characters are immediately available to your program. Another widely used function is noecho(). As the name suggests, when this function is set (used), the characters that are keyed in by the user will not show up on the screen. The two functions cbreak() and noecho() are typical examples of key management. Functions of this genre are explained in the key management section .

7.2. scanw() class of functions

These functions are similar to scanf() with the added capability of getting the input from any location on the screen.

7.3. getstr() class of functions

These functions are used to get strings from the terminal. In essence, this function performs the same task as would be achieved by a series of calls to getch() until a newline, carriage return, or end-of-file is received. The resulting string of characters are pointed to by str, which is a character pointer provided by the user.

7.4. Some examples

#include <ncurses.h>			/* ncurses.h includes stdio.h */  
#include <string.h> 
 
int main()
{
 char mesg[]="Enter a string: ";		/* message to be appeared on the screen */
 char str[80];
 int row,col;				/* to store the number of rows and *
					 * the number of colums of the screen */
 initscr();				/* start the curses mode */
 getmaxyx(stdscr,row,col);		/* get the number of rows and columns */
 mvprintw(row/2,(col-strlen(mesg))/2,"%s",mesg);
                     		/* print the message at the center of the screen */
 getstr(str);
 mvprintw(LINES - 2, 0, "You Entered: %s", str);
 getch();
 endwin();

 return 0;
}

8.1. The details

Let's get into more details of attributes. The functions attron(), attroff(), attrset() , and their sister functions attr_get() etc.. can be used to switch attributes on/off , get attributes and produce a colorful display.

The functions attron and attroff take a bit-mask of attributes and switch them on or off, respectively. The following video attributes, which are defined in <curses.h> can be passed to these functions.

    
    A_NORMAL        Normal display (no highlight)
    A_STANDOUT      Best highlighting mode of the terminal.
    A_UNDERLINE     Underlining
    A_REVERSE       Reverse video
    A_BLINK         Blinking
    A_DIM           Half bright
    A_BOLD          Extra bright or bold
    A_PROTECT       Protected mode
    A_INVIS         Invisible or blank mode
    A_ALTCHARSET    Alternate character set
    A_CHARTEXT      Bit-mask to extract a character
    COLOR_PAIR(n)   Color-pair number n 
    

The last one is the most colorful one :-) Colors are explained in the next sections.

We can OR(|) any number of above attributes to get a combined effect. If you wanted reverse video with blinking characters you can use

    attron(A_REVERSE | A_BLINK);

8.2. attron() vs attrset()

Then what is the difference between attron() and attrset()? attrset sets the attributes of window whereas attron just switches on the attribute given to it. So attrset() fully overrides whatever attributes the window previously had and sets it to the new attribute(s). Similarly attroff() just switches off the attribute(s) given to it as an argument. This gives us the flexibility of managing attributes easily.But if you use them carelessly you may loose track of what attributes the window has and garble the display. This is especially true while managing menus with colors and highlighting. So decide on a consistent policy and stick to it. You can always use standend() which is equivalent to attrset(A_NORMAL) which turns off all attributes and brings you to normal mode.

8.3. attr_get()

The function attr_get() gets the current attributes and color pair of the window. Though we might not use this as often as the above functions, this is useful in scanning areas of screen. Say we wanted to do some complex update on screen and we are not sure what attribute each character is associated with. Then this function can be used with either attrset or attron to produce the desired effect.

8.4. attr_ functions

There are series of functions like attr_set(), attr_on etc.. These are similar to above functions except that they take parameters of type attr_t.

8.5. wattr functions

For each of the above functions we have a corresponding function with 'w' which operates on a particular window. The above functions operate on stdscr.

8.6. chgat() functions

The function chgat() is listed in the end of the man page curs_attr. It actually is a useful one. This function can be used to set attributes for a group of characters without moving. I mean it !!! without moving the cursor :-) It changes the attributes of a given number of characters starting at the current cursor location.

We can give -1 as the character count to update till end of line. If you want to change attributes of characters from current position to end of line, just use this.

    chgat(-1, A_REVERSE, 0, NULL);

This function is useful when changing attributes for characters that are already on the screen. Move to the character from which you want to change and change the attribute.

Other functions wchgat(), mvchgat(), wchgat() behave similarly except that the w functions operate on the particular window. The mv functions first move the cursor then perform the work given to them. Actually chgat is a macro which is replaced by a wchgat() with stdscr as the window. Most of the "w-less" functions are macros.

#include <ncurses.h>

int main(int argc, char *argv[])
{	initscr();			/* Start curses mode 		*/
	start_color();			/* Start color functionality	*/
	
	init_pair(1, COLOR_CYAN, COLOR_BLACK);
	printw("A Big string which i didn't care to type fully ");
	mvchgat(0, 0, -1, A_BLINK, 1, NULL);	
	/* 
	 * First two parameters specify the position at which to start 
	 * Third parameter number of characters to update. -1 means till 
	 * end of line
	 * Forth parameter is the normal attribute you wanted to give 
	 * to the charcter
	 * Fifth is the color index. It is the index given during init_pair()
	 * use 0 if you didn't want color
	 * Sixth one is always NULL 
	 */
	refresh();
    	getch();
	endwin();			/* End curses mode		  */
	return 0;
}

This example also introduces us to the color world of curses. Colors will be explained in detail later. Use 0 for no color.

9.1. The basics

A Window can be created by calling the function newwin(). It doesn't create any thing on the screen actually. It allocates memory for a structure to manipulate the window and updates the structure with data regarding the window like it's size, beginy, beginx etc.. Hence in curses, a window is just an abstraction of an imaginary window, which can be manipulated independent of other parts of screen. The function newwin() returns a pointer to structure WINDOW, which can be passed to window related functions like wprintw() etc.. Finally the window can be destroyed with delwin(). It will deallocate the memory associated with the window structure.

9.2. Let there be a Window !!!

What fun is it, if a window is created and we can't see it. So the fun part begins by displaying the window. The function box() can be used to draw a border around the window. Let's explore these functions in more detail in this example.

#include <ncurses.h>


WINDOW *create_newwin(int height, int width, int starty, int startx);
void destroy_win(WINDOW *local_win);

int main(int argc, char *argv[])
{	WINDOW *my_win;
	int startx, starty, width, height;
	int ch;

	initscr();			/* Start curses mode 		*/
	cbreak();			/* Line buffering disabled, Pass on
					 * everty thing to me 		*/
	keypad(stdscr, TRUE);		/* I need that nifty F1 	*/

	height = 3;
	width = 10;
	starty = (LINES - height) / 2;	/* Calculating for a center placement */
	startx = (COLS - width) / 2;	/* of the window		*/
	printw("Press F1 to exit");
	refresh();
	my_win = create_newwin(height, width, starty, startx);

	while((ch = getch()) != KEY_F(1))
	{	switch(ch)
		{	case KEY_LEFT:
				destroy_win(my_win);
				my_win = create_newwin(height, width, starty,--startx);
				break;
			case KEY_RIGHT:
				destroy_win(my_win);
				my_win = create_newwin(height, width, starty,++startx);
				break;
			case KEY_UP:
				destroy_win(my_win);
				my_win = create_newwin(height, width, --starty,startx);
				break;
			case KEY_DOWN:
				destroy_win(my_win);
				my_win = create_newwin(height, width, ++starty,startx);
				break;	
		}
	}
		
	endwin();			/* End curses mode		  */
	return 0;
}

WINDOW *create_newwin(int height, int width, int starty, int startx)
{	WINDOW *local_win;

	local_win = newwin(height, width, starty, startx);
	box(local_win, 0 , 0);		/* 0, 0 gives default characters 
					 * for the vertical and horizontal
					 * lines			*/
	wrefresh(local_win);		/* Show that box 		*/

	return local_win;
}

void destroy_win(WINDOW *local_win)
{	
	/* box(local_win, ' ', ' '); : This won't produce the desired
	 * result of erasing the window. It will leave it's four corners 
	 * and so an ugly remnant of window. 
	 */
	wborder(local_win, ' ', ' ', ' ',' ',' ',' ',' ',' ');
	/* The parameters taken are 
	 * 1. win: the window on which to operate
	 * 2. ls: character to be used for the left side of the window 
	 * 3. rs: character to be used for the right side of the window 
	 * 4. ts: character to be used for the top side of the window 
	 * 5. bs: character to be used for the bottom side of the window 
	 * 6. tl: character to be used for the top left corner of the window 
	 * 7. tr: character to be used for the top right corner of the window 
	 * 8. bl: character to be used for the bottom left corner of the window 
	 * 9. br: character to be used for the bottom right corner of the window
	 */
	wrefresh(local_win);
	delwin(local_win);
}

9.3. Explanation

Don't scream. I know it's a big example. But I have to explain some important things here :-). This program creates a rectangular window that can be moved with left, right, up, down arrow keys. It repeatedly creates and destroys windows as user press a key. Don't go beyond the screen limits. Checking for those limits is left as an exercise for the reader. Let's dissect it by line by line.

The create_newwin() function creates a window with newwin() and displays a border around it with box. The function destroy_win() first erases the window from screen by painting a border with ' ' character and then calling delwin() to deallocate memory related to it. Depending on the key the user presses, starty or startx is changed and a new window is created.

In the destroy_win, as you can see, I used wborder instead of box. The reason is written in the comments (You missed it. I know. Read the code :-)). wborder draws a border around the window with the characters given to it as the 4 corner points and the 4 lines. To put it clearly, if you have called wborder as below:

wborder(win, '|', '|', '-', '-', '+', '+', '+', '+');

it produces some thing like

    +------------+
    |            |
    |            |
    |            |
    |            |
    |            |
    |            |
    +------------+

9.4. The other stuff in the example

You can also see in the above examples, that I have used the variables COLS, LINES which are initialized to the screen sizes after initscr(). They can be useful in finding screen dimensions and finding the center co-ordinate of the screen as above. The function getch() as usual gets the key from keyboard and according to the key it does the corresponding work. This type of switch- case is very common in any GUI based programs.

9.5. Other Border functions

Above program is grossly inefficient in that with each press of a key, a window is destroyed and another is created. So let's write a more efficient program which uses other border related functions.

The following program uses mvhline() and mvvline() to achieve similar effect. These two functions are simple. They create a horizontal or vertical line of the specified length at the specified position.

#include <ncurses.h>

typedef struct _win_border_struct {
	chtype 	ls, rs, ts, bs, 
	 	tl, tr, bl, br;
}WIN_BORDER;

typedef struct _WIN_struct {

	int startx, starty;
	int height, width;
	WIN_BORDER border;
}WIN;

void init_win_params(WIN *p_win);
void print_win_params(WIN *p_win);
void create_box(WIN *win, bool flag);

int main(int argc, char *argv[])
{	WIN win;
	int ch;

	initscr();			/* Start curses mode 		*/
	start_color();			/* Start the color functionality */
	cbreak();			/* Line buffering disabled, Pass on
					 * everty thing to me 		*/
	keypad(stdscr, TRUE);		/* I need that nifty F1 	*/
	noecho();
	init_pair(1, COLOR_CYAN, COLOR_BLACK);

	/* Initialize the window parameters */
	init_win_params(&win);
	print_win_params(&win);

	attron(COLOR_PAIR(1));
	printw("Press F1 to exit");
	refresh();
	attroff(COLOR_PAIR(1));
	
	create_box(&win, TRUE);
	while((ch = getch()) != KEY_F(1))
	{	switch(ch)
		{	case KEY_LEFT:
				create_box(&win, FALSE);
				--win.startx;
				create_box(&win, TRUE);
				break;
			case KEY_RIGHT:
				create_box(&win, FALSE);
				++win.startx;
				create_box(&win, TRUE);
				break;
			case KEY_UP:
				create_box(&win, FALSE);
				--win.starty;
				create_box(&win, TRUE);
				break;
			case KEY_DOWN:
				create_box(&win, FALSE);
				++win.starty;
				create_box(&win, TRUE);
				break;	
		}
	}
	endwin();			/* End curses mode		  */
	return 0;
}
void init_win_params(WIN *p_win)
{
	p_win->height = 3;
	p_win->width = 10;
	p_win->starty = (LINES - p_win->height)/2;	
	p_win->startx = (COLS - p_win->width)/2;

	p_win->border.ls = '|';
	p_win->border.rs = '|';
	p_win->border.ts = '-';
	p_win->border.bs = '-';
	p_win->border.tl = '+';
	p_win->border.tr = '+';
	p_win->border.bl = '+';
	p_win->border.br = '+';

}
void print_win_params(WIN *p_win)
{
#ifdef _DEBUG
	mvprintw(25, 0, "%d %d %d %d", p_win->startx, p_win->starty, 
				p_win->width, p_win->height);
	refresh();
#endif
}
void create_box(WIN *p_win, bool flag)
{	int i, j;
	int x, y, w, h;

	x = p_win->startx;
	y = p_win->starty;
	w = p_win->width;
	h = p_win->height;

	if(flag == TRUE)
	{	mvaddch(y, x, p_win->border.tl);
		mvaddch(y, x + w, p_win->border.tr);
		mvaddch(y + h, x, p_win->border.bl);
		mvaddch(y + h, x + w, p_win->border.br);
		mvhline(y, x + 1, p_win->border.ts, w - 1);
		mvhline(y + h, x + 1, p_win->border.bs, w - 1);
		mvvline(y + 1, x, p_win->border.ls, h - 1);
		mvvline(y + 1, x + w, p_win->border.rs, h - 1);

	}
	else
		for(j = y; j <= y + h; ++j)
			for(i = x; i <= x + w; ++i)
				mvaddch(j, i, ' ');
				
	refresh();

}

10.1. The basics

Life seems dull with no colors. Curses has a nice mechanism to handle colors. Let's get into the thick of the things with a small program.

#include <ncurses.h>

void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string);
int main(int argc, char *argv[])
{	initscr();			/* Start curses mode 		*/
	if(has_colors() == FALSE)
	{	endwin();
		printf("Your terminal does not support color\n");
		exit(1);
	}
	start_color();			/* Start color 			*/
	init_pair(1, COLOR_RED, COLOR_BLACK);

	attron(COLOR_PAIR(1));
	print_in_middle(stdscr, LINES / 2, 0, 0, "Viola !!! In color ...");
	attroff(COLOR_PAIR(1));
    	getch();
	endwin();
}
void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string)
{	int length, x, y;
	float temp;

	if(win == NULL)
		win = stdscr;
	getyx(win, y, x);
	if(startx != 0)
		x = startx;
	if(starty != 0)
		y = starty;
	if(width == 0)
		width = 80;

	length = strlen(string);
	temp = (width - length)/ 2;
	x = startx + (int)temp;
	mvwprintw(win, y, x, "%s", string);
	refresh();
}

As you can see, to start using color, you should first call the function start_color(). After that, you can use color capabilities of your terminals using various functions. To find out whether a terminal has color capabilities or not, you can use has_colors() function, which returns FALSE if the terminal does not support color.

Curses initializes all the colors supported by terminal when start_color() is called. These can be accessed by the define constants like COLOR_BLACK etc. Now to actually start using colors, you have to define pairs. Colors are always used in pairs. That means you have to use the function init_pair() to define the foreground and background for the pair number you give. After that that pair number can be used as a normal attribute with COLOR_PAIR()function. This may seem to be cumbersome at first. But this elegant solution allows us to manage color pairs very easily. To appreciate it, you have to look into the the source code of "dialog", a utility for displaying dialog boxes from shell scripts. The developers have defined foreground and background combinations for all the colors they might need and initialized at the beginning. This makes it very easy to set attributes just by accessing a pair which we already have defined as a constant.

The following colors are defined in curses.h. You can use these as parameters for various color functions.

COLOR_BLACK 0 COLOR_RED 1 COLOR_GREEN 2 COLOR_YELLOW 3 COLOR_BLUE 4 COLOR_MAGENTA 5 COLOR_CYAN 6 COLOR_WHITE 7

10.2. Changing Color Definitions

The function init_color()can be used to change the rgb values for the colors defined by curses initially. Say you wanted to lighten the intensity of red color by a minuscule. Then you can use this function as

    init_color(COLOR_RED, 700, 0, 0);
    /* param 1     : color name
     * param 2, 3, 4 : rgb content min = 0, max = 1000 */

If your terminal cannot change the color definitions, the function returns ERR. The function can_change_color() can be used to find out whether the terminal has the capability of changing color content or not. The rgb content is scaled from 0 to 1000. Initially RED color is defined with content 1000(r), 0(g), 0(b).

10.3. Color Content

The functions color_content() and pair_content() can be used to find the color content and foreground, background combination for the pair.

11.1. The Basics

No GUI is complete without a strong user interface and to interact with the user, a curses program should be sensitive to key presses or the mouse actions done by the user. Let's deal with the keys first.

As you have seen in almost all of the above examples, it's very easy to get key input from the user. A simple way of getting key presses is to use getch() function. The cbreak mode should be enabled to read keys when you are interested in reading individual key hits rather than complete lines of text (which usually end with a carriage return). keypad should be enabled to get the Functions keys, arrow keys etc. See the initialization section for details.

getch() returns an integer corresponding to the key pressed. If it is a normal character, the integer value will be equivalent to the character. Otherwise it returns a number which can be matched with the constants defined in curses.h. For example if the user presses F1, the integer returned is 265. This can be checked using the macro KEY_F() defined in curses.h. This makes reading keys portable and easy to manage.

For example, if you call getch() like this

    int ch;

    ch = getch();

getch() will wait for the user to press a key, (unless you specified a timeout) and when user presses a key, the corresponding integer is returned. Then you can check the value returned with the constants defined in curses.h to match against the keys you want.

The following code piece will do that job.

    if(ch == KEY_LEFT)
        printw("Left arrow is pressed\n");

Let's write a small program which creates a menu which can be navigated by up and down arrows.

11.2. A Simple Key Usage example

#include <stdio.h>
#include <ncurses.h>

#define WIDTH 30
#define HEIGHT 10 

int startx = 0;
int starty = 0;

char *choices[] = { 
			"Choice 1",
			"Choice 2",
			"Choice 3",
			"Choice 4",
			"Exit",
		  };
int n_choices = sizeof(choices) / sizeof(char *);
void print_menu(WINDOW *menu_win, int highlight);

int main()
{	WINDOW *menu_win;
	int highlight = 1;
	int choice = 0;
	int c;

	initscr();
	clear();
	noecho();
	cbreak();	/* Line buffering disabled. pass on everything */
	startx = (80 - WIDTH) / 2;
	starty = (24 - HEIGHT) / 2;
		
	menu_win = newwin(HEIGHT, WIDTH, starty, startx);
	keypad(menu_win, TRUE);
	mvprintw(0, 0, "Use arrow keys to go up and down, Press enter to select a choice");
	refresh();
	print_menu(menu_win, highlight);
	while(1)
	{	c = wgetch(menu_win);
		switch(c)
		{	case KEY_UP:
				if(highlight == 1)
					highlight = n_choices;
				else
					--highlight;
				break;
			case KEY_DOWN:
				if(highlight == n_choices)
					highlight = 1;
				else 
					++highlight;
				break;
			case 10:
				choice = highlight;
				break;
			default:
				mvprintw(24, 0, "Charcter pressed is = %3d Hopefully it can be printed as '%c'", c, c);
				refresh();
				break;
		}
		print_menu(menu_win, highlight);
		if(choice != 0)	/* User did a choice come out of the infinite loop */
			break;
	}	
	mvprintw(23, 0, "You chose choice %d with choice string %s\n", choice, choices[choice - 1]);
	clrtoeol();
	refresh();
	endwin();
	return 0;
}


void print_menu(WINDOW *menu_win, int highlight)
{
	int x, y, i;	

	x = 2;
	y = 2;
	box(menu_win, 0, 0);
	for(i = 0; i < n_choices; ++i)
	{	if(highlight == i + 1) /* High light the present choice */
		{	wattron(menu_win, A_REVERSE); 
			mvwprintw(menu_win, y, x, "%s", choices[i]);
			wattroff(menu_win, A_REVERSE);
		}
		else
			mvwprintw(menu_win, y, x, "%s", choices[i]);
		++y;
	}
	wrefresh(menu_win);
}

12.1. The Basics

Before you do any thing else, the events you want to receive have to be enabled with mousemask().

    mousemask(  mmask_t newmask,    /* The events you want to listen to */
                mmask_t *oldmask)    /* The old events mask                */

The first parameter to above function is a bit mask of events you would like to listen. By default, all the events are turned off. The bit mask ALL_MOUSE_EVENTS can be used to get all the events.

The following are all the event masks:

    Name            Description
       ---------------------------------------------------------------------
       BUTTON1_PRESSED          mouse button 1 down
       BUTTON1_RELEASED         mouse button 1 up
       BUTTON1_CLICKED          mouse button 1 clicked
       BUTTON1_DOUBLE_CLICKED   mouse button 1 double clicked
       BUTTON1_TRIPLE_CLICKED   mouse button 1 triple clicked
       BUTTON2_PRESSED          mouse button 2 down
       BUTTON2_RELEASED         mouse button 2 up
       BUTTON2_CLICKED          mouse button 2 clicked
       BUTTON2_DOUBLE_CLICKED   mouse button 2 double clicked
       BUTTON2_TRIPLE_CLICKED   mouse button 2 triple clicked
       BUTTON3_PRESSED          mouse button 3 down
       BUTTON3_RELEASED         mouse button 3 up
       BUTTON3_CLICKED          mouse button 3 clicked
       BUTTON3_DOUBLE_CLICKED   mouse button 3 double clicked
       BUTTON3_TRIPLE_CLICKED   mouse button 3 triple clicked
       BUTTON4_PRESSED          mouse button 4 down
       BUTTON4_RELEASED         mouse button 4 up
       BUTTON4_CLICKED          mouse button 4 clicked
       BUTTON4_DOUBLE_CLICKED   mouse button 4 double clicked
       BUTTON4_TRIPLE_CLICKED   mouse button 4 triple clicked
       BUTTON_SHIFT             shift was down during button state change
       BUTTON_CTRL              control was down during button state change
       BUTTON_ALT               alt was down during button state change
       ALL_MOUSE_EVENTS         report all button state changes
       REPORT_MOUSE_POSITION    report mouse movement

12.2. Getting the events

Once a class of mouse events have been enabled, getch() class of functions return KEY_MOUSE every time some mouse event happens. Then the mouse event can be retrieved with getmouse().

The code approximately looks like this:

    MEVENT event;

    ch = getch();
    if(ch == KEY_MOUSE)
        if(getmouse(&event) == OK)
            .    /* Do some thing with the event */
            .
            .

getmouse() returns the event into the pointer given to it. It's a structure which contains

    typedef struct
    {
        short id;         /* ID to distinguish multiple devices */
        int x, y, z;      /* event coordinates */
        mmask_t bstate;   /* button state bits */
    }    

The bstate is the main variable we are interested in. It tells the button state of the mouse.

Then with a code snippet like the following, we can find out what happened.

    if(event.bstate & BUTTON1_PRESSED)
        printw("Left Button Pressed");

12.3. Putting it all Together

That's pretty much interfacing with mouse. Let's create the same menu and enable mouse interaction. To make things simpler, key handling is removed.

#include <ncurses.h>

#define WIDTH 30
#define HEIGHT 10 

int startx = 0;
int starty = 0;

char *choices[] = { 	"Choice 1",
			"Choice 2",
			"Choice 3",
			"Choice 4",
			"Exit",
		  };

int n_choices = sizeof(choices) / sizeof(char *);

void print_menu(WINDOW *menu_win, int highlight);
void report_choice(int mouse_x, int mouse_y, int *p_choice);

int main()
{	int c, choice = 0;
	WINDOW *menu_win;
	MEVENT event;

	/* Initialize curses */
	initscr();
	clear();
	noecho();
	cbreak();	//Line buffering disabled. pass on everything

	/* Try to put the window in the middle of screen */
	startx = (80 - WIDTH) / 2;
	starty = (24 - HEIGHT) / 2;
	
	attron(A_REVERSE);
	mvprintw(23, 1, "Click on Exit to quit (Works best in a virtual console)");
	refresh();
	attroff(A_REVERSE);

	/* Print the menu for the first time */
	menu_win = newwin(HEIGHT, WIDTH, starty, startx);
	print_menu(menu_win, 1);
	/* Get all the mouse events */
	mousemask(ALL_MOUSE_EVENTS, NULL);
	
	while(1)
	{	c = wgetch(menu_win);
		switch(c)
		{	case KEY_MOUSE:
			if(getmouse(&event) == OK)
			{	/* When the user clicks left mouse button */
				if(event.bstate & BUTTON1_PRESSED)
				{	report_choice(event.x + 1, event.y + 1, &choice);
					if(choice == -1) //Exit chosen
						goto end;
					mvprintw(22, 1, "Choice made is : %d String Chosen is \"%10s\"", choice, choices[choice - 1]);
					refresh(); 
				}
			}
			print_menu(menu_win, choice);
			break;
		}
	}		
end:
	endwin();
	return 0;
}


void print_menu(WINDOW *menu_win, int highlight)
{
	int x, y, i;	

	x = 2;
	y = 2;
	box(menu_win, 0, 0);
	for(i = 0; i < n_choices; ++i)
	{	if(highlight == i + 1)
		{	wattron(menu_win, A_REVERSE); 
			mvwprintw(menu_win, y, x, "%s", choices[i]);
			wattroff(menu_win, A_REVERSE);
		}
		else
			mvwprintw(menu_win, y, x, "%s", choices[i]);
		++y;
	}
	wrefresh(menu_win);
}

/* Report the choice according to mouse position */
void report_choice(int mouse_x, int mouse_y, int *p_choice)
{	int i,j, choice;

	i = startx + 2;
	j = starty + 3;
	
	for(choice = 0; choice < n_choices; ++choice)
		if(mouse_y == j + choice && mouse_x >= i && mouse_x <= i + strlen(choices[choice]))
		{	if(choice == n_choices - 1)
				*p_choice = -1;		
			else
				*p_choice = choice + 1;	
			break;
		}
}

12.4. Miscellaneous Functions

The functions mouse_trafo() and wmouse_trafo() can be used to convert to mouse co-ordinates to screen relative co-ordinates. See curs_mouse(3X) man page for details.

The mouseinterval function sets the maximum time (in thousands of a second) that can elapse between press and release events in order for them to be recognized as a click. This function returns the previous interval value. The default is one fifth of a second.

13.1. getyx() functions

The function getyx() can be used to find out the present cursor co-ordinates. It will fill the values of x and y co-ordinates in the arguments given to it. Since getyx() is a macro you don't have to pass the address of the variables. It can be called as

    getyx(win, y, x);
    /* win: window pointer
     *   y, x: y, x co-ordinates will be put into this variables 
     */

The function getparyx() gets the beginning co-ordinates of the sub window relative to the main window. This is some times useful to update a sub window. When designing fancy stuff like writing multiple menus, it becomes difficult to store the menu positions, their first option co-ordinates etc. A simple solution to this problem, is to create menus in sub windows and later find the starting co-ordinates of the menus by using getparyx().

The functions getbegyx() and getmaxyx() store current window's beginning and maximum co-ordinates. These functions are useful in the same way as above in managing the windows and sub windows effectively.

13.2. Screen Dumping

While writing games, some times it becomes necessary to store the state of the screen and restore it back to the same state. The function scr_dump() can be used to dump the screen contents to a file given as an argument. Later it can be restored by scr_restore function. These two simple functions can be used effectively to maintain a fast moving game with changing scenarios.

13.3. Window Dumping

To store and restore windows, the functions putwin() and getwin() can be used. putwin() puts the present window state into a file, which can be later restored by getwin().

The function copywin() can be used to copy a window completely onto another window. It takes the source and destination windows as parameters and according to the rectangle specified, it copies the rectangular region from source to destination window. It's last parameter specifies whether to overwrite or just overlay the contents on to the destination window. If this argument is true, then the copying is non-destructive.

14.1. curs_set()

This function can be used to make the cursor invisible. The parameter to this function should be

    0 : invisible      or
    1 : normal    or
    2 : very visible.

14.2. Temporarily Leaving Curses mode

Some times you may want to get back to cooked mode (normal line buffering mode) temporarily. In such a case you will first need to save the tty modes with a call to def_prog_mode() and then call endwin() to end the curses mode. This will leave you in the original tty mode. To get back to curses once you are done, call reset_prog_mode() . This function returns the tty to the state stored by def_prog_mode(). Then do refresh(), and you are back to the curses mode. Here is an example showing the sequence of things to be done.

#include <ncurses.h>

int main()
{	
	initscr();			/* Start curses mode 		  */
	printw("Hello World !!!\n");	/* Print Hello World		  */
	refresh();			/* Print it on to the real screen */
	def_prog_mode();		/* Save the tty modes		  */
	endwin();			/* End curses mode temporarily	  */
	system("/bin/sh");		/* Do whatever you like in cooked mode */
	reset_prog_mode();		/* Return to the previous tty mode*/
					/* stored by def_prog_mode() 	  */
	refresh();			/* Do refresh() to restore the	  */
					/* Screen contents		  */
	printw("Another String\n");	/* Back to curses use the full    */
	refresh();			/* capabilities of curses	  */
	endwin();			/* End curses mode		  */

	return 0;
}

14.3. ACS_ variables

If you have ever programmed in DOS, you know about those nifty characters in extended character set. They are printable only on some terminals. NCURSES functions like box() use these characters. All these variables start with ACS meaning alternative character set. You might have noticed me using these characters in some of the programs above. Here's an example showing all the characters.

#include <ncurses.h>

int main()
{
        initscr();

        printw("Upper left corner           "); addch(ACS_ULCORNER); printw("\n"); 
        printw("Lower left corner           "); addch(ACS_LLCORNER); printw("\n");
        printw("Lower right corner          "); addch(ACS_LRCORNER); printw("\n");
        printw("Tee pointing right          "); addch(ACS_LTEE); printw("\n");
        printw("Tee pointing left           "); addch(ACS_RTEE); printw("\n");
        printw("Tee pointing up             "); addch(ACS_BTEE); printw("\n");
        printw("Tee pointing down           "); addch(ACS_TTEE); printw("\n");
        printw("Horizontal line             "); addch(ACS_HLINE); printw("\n");
        printw("Vertical line               "); addch(ACS_VLINE); printw("\n");
        printw("Large Plus or cross over    "); addch(ACS_PLUS); printw("\n");
        printw("Scan Line 1                 "); addch(ACS_S1); printw("\n");
        printw("Scan Line 3                 "); addch(ACS_S3); printw("\n");
        printw("Scan Line 7                 "); addch(ACS_S7); printw("\n");
        printw("Scan Line 9                 "); addch(ACS_S9); printw("\n");
        printw("Diamond                     "); addch(ACS_DIAMOND); printw("\n");
        printw("Checker board (stipple)     "); addch(ACS_CKBOARD); printw("\n");
        printw("Degree Symbol               "); addch(ACS_DEGREE); printw("\n");
        printw("Plus/Minus Symbol           "); addch(ACS_PLMINUS); printw("\n");
        printw("Bullet                      "); addch(ACS_BULLET); printw("\n");
        printw("Arrow Pointing Left         "); addch(ACS_LARROW); printw("\n");
        printw("Arrow Pointing Right        "); addch(ACS_RARROW); printw("\n");
        printw("Arrow Pointing Down         "); addch(ACS_DARROW); printw("\n");
        printw("Arrow Pointing Up           "); addch(ACS_UARROW); printw("\n");
        printw("Board of squares            "); addch(ACS_BOARD); printw("\n");
        printw("Lantern Symbol              "); addch(ACS_LANTERN); printw("\n");
        printw("Solid Square Block          "); addch(ACS_BLOCK); printw("\n");
        printw("Less/Equal sign             "); addch(ACS_LEQUAL); printw("\n");
        printw("Greater/Equal sign          "); addch(ACS_GEQUAL); printw("\n");
        printw("Pi                          "); addch(ACS_PI); printw("\n");
        printw("Not equal                   "); addch(ACS_NEQUAL); printw("\n");
        printw("UK pound sign               "); addch(ACS_STERLING); printw("\n");

        refresh();
        getch();
        endwin();

	return 0;
}

16.1. The Basics

Panel object is a window that is implicitly treated as part of a deck including all other panel objects. The deck is treated as a stack with the top panel being completely visible and the other panels may or may not be obscured according to their positions. So the basic idea is to create a stack of overlapping panels and use panels library to display them correctly. There is a function similar to refresh() which, when called , displays panels in the correct order. Functions are provided to hide or show panels, move panels, change its size etc.. The overlapping problem is managed by the panels library during all the calls to these functions.

The general flow of a panel program goes like this:

1. Create the windows (with newwin()) to be attached to the panels.

2. Create panels with the chosen visibility order. Stack them up according to the desired visibility. The function new_panel() is used to created panels.

3. Call update_panels() to write the panels to the virtual screen in correct visibility order. Do a doupdate() to show it on the screen.

4. Mainpulate the panels with show_panel(), hide_panel(), move_panel() etc. Make use of helper functions like panel_hidden() and panel_window(). Make use of user pointer to store custom data for a panel. Use the functions set_panel_userptr() and panel_userptr() to set and get the user pointer for a panel.

5. When you are done with the panel use del_panel() to delete the panel.

Let's make the concepts clear, with some programs. The following is a simple program which creates 3 overlapping panels and shows them on the screen.

16.2. Compiling With the Panels Library

To use panels library functions, you have to include panel.h and to link the program with panels library the flag -lpanel should be added along with -lncurses in that order.

    #include <panel.h>
    .
    .
    .

    compile and link: gcc <program file> -lpanel -lncurses

#include <panel.h>

int main()
{	WINDOW *my_wins[3];
	PANEL  *my_panels[3];
	int lines = 10, cols = 40, y = 2, x = 4, i;

	initscr();
	cbreak();
	noecho();

	/* Create windows for the panels */
	my_wins[0] = newwin(lines, cols, y, x);
	my_wins[1] = newwin(lines, cols, y + 1, x + 5);
	my_wins[2] = newwin(lines, cols, y + 2, x + 10);

	/* 
	 * Create borders around the windows so that you can see the effect
	 * of panels
	 */
	for(i = 0; i < 3; ++i)
		box(my_wins[i], 0, 0);

	/* Attach a panel to each window */ 	/* Order is bottom up */
	my_panels[0] = new_panel(my_wins[0]); 	/* Push 0, order: stdscr-0 */
	my_panels[1] = new_panel(my_wins[1]); 	/* Push 1, order: stdscr-0-1 */
	my_panels[2] = new_panel(my_wins[2]); 	/* Push 2, order: stdscr-0-1-2 */

	/* Update the stacking order. 2nd panel will be on top */
	update_panels();

	/* Show it on the screen */
	doupdate();
	
	getch();
	endwin();
}

As you can see, above program follows a simple flow as explained. The windows are created with newwin() and then they are attached to panels with new_panel(). As we attach one panel after another, the stack of panels gets updated. To put them on screen update_panels() and doupdate() are called.

16.3. Panel Window Browsing

A slightly complicated example is given below. This program creates 3 windows which can be cycled through using tab. Have a look at the code.

#include <panel.h>

#define NLINES 10
#define NCOLS 40

void init_wins(WINDOW **wins, int n);
void win_show(WINDOW *win, char *label, int label_color);
void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color);

int main()
{	WINDOW *my_wins[3];
	PANEL  *my_panels[3];
	PANEL  *top;
	int ch;

	/* Initialize curses */
	initscr();
	start_color();
	cbreak();
	noecho();
	keypad(stdscr, TRUE);

	/* Initialize all the colors */
	init_pair(1, COLOR_RED, COLOR_BLACK);
	init_pair(2, COLOR_GREEN, COLOR_BLACK);
	init_pair(3, COLOR_BLUE, COLOR_BLACK);
	init_pair(4, COLOR_CYAN, COLOR_BLACK);

	init_wins(my_wins, 3);
	
	/* Attach a panel to each window */ 	/* Order is bottom up */
	my_panels[0] = new_panel(my_wins[0]); 	/* Push 0, order: stdscr-0 */
	my_panels[1] = new_panel(my_wins[1]); 	/* Push 1, order: stdscr-0-1 */
	my_panels[2] = new_panel(my_wins[2]); 	/* Push 2, order: stdscr-0-1-2 */

	/* Set up the user pointers to the next panel */
	set_panel_userptr(my_panels[0], my_panels[1]);
	set_panel_userptr(my_panels[1], my_panels[2]);
	set_panel_userptr(my_panels[2], my_panels[0]);

	/* Update the stacking order. 2nd panel will be on top */
	update_panels();

	/* Show it on the screen */
	attron(COLOR_PAIR(4));
	mvprintw(LINES - 2, 0, "Use tab to browse through the windows (F1 to Exit)");
	attroff(COLOR_PAIR(4));
	doupdate();

	top = my_panels[2];
	while((ch = getch()) != KEY_F(1))
	{	switch(ch)
		{	case 9:
				top = (PANEL *)panel_userptr(top);
				top_panel(top);
				break;
		}
		update_panels();
		doupdate();
	}
	endwin();
	return 0;
}

/* Put all the windows */
void init_wins(WINDOW **wins, int n)
{	int x, y, i;
	char label[80];

	y = 2;
	x = 10;
	for(i = 0; i < n; ++i)
	{	wins[i] = newwin(NLINES, NCOLS, y, x);
		sprintf(label, "Window Number %d", i + 1);
		win_show(wins[i], label, i + 1);
		y += 3;
		x += 7;
	}
}

/* Show the window with a border and a label */
void win_show(WINDOW *win, char *label, int label_color)
{	int startx, starty, height, width;

	getbegyx(win, starty, startx);
	getmaxyx(win, height, width);

	box(win, 0, 0);
	mvwaddch(win, 2, 0, ACS_LTEE); 
	mvwhline(win, 2, 1, ACS_HLINE, width - 2); 
	mvwaddch(win, 2, width - 1, ACS_RTEE); 
	
	print_in_middle(win, 1, 0, width, label, COLOR_PAIR(label_color));
}

void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color)
{	int length, x, y;
	float temp;

	if(win == NULL)
		win = stdscr;
	getyx(win, y, x);
	if(startx != 0)
		x = startx;
	if(starty != 0)
		y = starty;
	if(width == 0)
		width = 80;

	length = strlen(string);
	temp = (width - length)/ 2;
	x = startx + (int)temp;
	wattron(win, color);
	mvwprintw(win, y, x, "%s", string);
	wattroff(win, color);
	refresh();
}

16.4. Using User Pointers

In the above example I used user pointers to find out the next window in the cycle. We can attach custom information to the panel by specifying a user pointer, which can point to any information you want to store. In this case I stored the pointer to the next panel in the cycle. User pointer for a panel can be set with the function set_panel_userptr(). It can be accessed using the function panel_userptr() which will return the user pointer for the panel given as argument. After finding the next panel in the cycle It's brought to the top by the function top_panel(). This function brings the panel given as argument to the top of the panel stack.

16.5. Moving and Resizing Panels

The function move_panel() can be used to move a panel to the desired location. It does not change the position of the panel in the stack. Make sure that you use move_panel() instead mvwin() on the window associated with the panel.

Resizing a panel is slightly complex. There is no straight forward function just to resize the window associated with a panel. A solution to resize a panel is to create a new window with the desired sizes, change the window associated with the panel using replace_panel(). Don't forget to delete the old window. The window associated with a panel can be found by using the function panel_window().

The following program shows these concepts, in supposedly simple program. You can cycle through the window with <TAB> as usual. To resize or move the active panel press 'r' for resize 'm' for moving. Then use arrow keys to resize or move it to the desired way and press enter to end your resizing or moving. This example makes use of user data to get the required data to do the operations.

#include <panel.h>

typedef struct _PANEL_DATA {
	int x, y, w, h;
	char label[80]; 
	int label_color;
	PANEL *next;
}PANEL_DATA;

#define NLINES 10
#define NCOLS 40

void init_wins(WINDOW **wins, int n);
void win_show(WINDOW *win, char *label, int label_color);
void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color);
void set_user_ptrs(PANEL **panels, int n);

int main()
{	WINDOW *my_wins[3];
	PANEL  *my_panels[3];
	PANEL_DATA  *top;
	PANEL *stack_top;
	WINDOW *temp_win, *old_win;
	int ch;
	int newx, newy, neww, newh;
	int size = FALSE, move = FALSE;

	/* Initialize curses */
	initscr();
	start_color();
	cbreak();
	noecho();
	keypad(stdscr, TRUE);

	/* Initialize all the colors */
	init_pair(1, COLOR_RED, COLOR_BLACK);
	init_pair(2, COLOR_GREEN, COLOR_BLACK);
	init_pair(3, COLOR_BLUE, COLOR_BLACK);
	init_pair(4, COLOR_CYAN, COLOR_BLACK);

	init_wins(my_wins, 3);
	
	/* Attach a panel to each window */ 	/* Order is bottom up */
	my_panels[0] = new_panel(my_wins[0]); 	/* Push 0, order: stdscr-0 */
	my_panels[1] = new_panel(my_wins[1]); 	/* Push 1, order: stdscr-0-1 */
	my_panels[2] = new_panel(my_wins[2]); 	/* Push 2, order: stdscr-0-1-2 */

	set_user_ptrs(my_panels, 3);
	/* Update the stacking order. 2nd panel will be on top */
	update_panels();

	/* Show it on the screen */
	attron(COLOR_PAIR(4));
	mvprintw(LINES - 3, 0, "Use 'm' for moving, 'r' for resizing");
	mvprintw(LINES - 2, 0, "Use tab to browse through the windows (F1 to Exit)");
	attroff(COLOR_PAIR(4));
	doupdate();

	stack_top = my_panels[2];
	top = (PANEL_DATA *)panel_userptr(stack_top);
	newx = top->x;
	newy = top->y;
	neww = top->w;
	newh = top->h;
	while((ch = getch()) != KEY_F(1))
	{	switch(ch)
		{	case 9:		/* Tab */
				top = (PANEL_DATA *)panel_userptr(stack_top);
				top_panel(top->next);
				stack_top = top->next;
				top = (PANEL_DATA *)panel_userptr(stack_top);
				newx = top->x;
				newy = top->y;
				neww = top->w;
				newh = top->h;
				break;
			case 'r':	/* Re-Size*/
				size = TRUE;
				attron(COLOR_PAIR(4));
				mvprintw(LINES - 4, 0, "Entered Resizing :Use Arrow Keys to resize and press <ENTER> to end resizing");
				refresh();
				attroff(COLOR_PAIR(4));
				break;
			case 'm':	/* Move */
				attron(COLOR_PAIR(4));
				mvprintw(LINES - 4, 0, "Entered Moving: Use Arrow Keys to Move and press <ENTER> to end moving");
				refresh();
				attroff(COLOR_PAIR(4));
				move = TRUE;
				break;
			case KEY_LEFT:
				if(size == TRUE)
				{	--newx;
					++neww;
				}
				if(move == TRUE)
					--newx;
				break;
			case KEY_RIGHT:
				if(size == TRUE)
				{	++newx;
					--neww;
				}
				if(move == TRUE)
					++newx;
				break;
			case KEY_UP:
				if(size == TRUE)
				{	--newy;
					++newh;
				}
				if(move == TRUE)
					--newy;
				break;
			case KEY_DOWN:
				if(size == TRUE)
				{	++newy;
					--newh;
				}
				if(move == TRUE)
					++newy;
				break;
			case 10:	/* Enter */
				move(LINES - 4, 0);
				clrtoeol();
				refresh();
				if(size == TRUE)
				{	old_win = panel_window(stack_top);
					temp_win = newwin(newh, neww, newy, newx);
					replace_panel(stack_top, temp_win);
					win_show(temp_win, top->label, top->label_color); 
					delwin(old_win);
					size = FALSE;
				}
				if(move == TRUE)
				{	move_panel(stack_top, newy, newx);
					move = FALSE;
				}
				break;
			
		}
		attron(COLOR_PAIR(4));
		mvprintw(LINES - 3, 0, "Use 'm' for moving, 'r' for resizing");
	    	mvprintw(LINES - 2, 0, "Use tab to browse through the windows (F1 to Exit)");
	    	attroff(COLOR_PAIR(4));
	        refresh();	
		update_panels();
		doupdate();
	}
	endwin();
	return 0;
}

/* Put all the windows */
void init_wins(WINDOW **wins, int n)
{	int x, y, i;
	char label[80];

	y = 2;
	x = 10;
	for(i = 0; i < n; ++i)
	{	wins[i] = newwin(NLINES, NCOLS, y, x);
		sprintf(label, "Window Number %d", i + 1);
		win_show(wins[i], label, i + 1);
		y += 3;
		x += 7;
	}
}

/* Set the PANEL_DATA structures for individual panels */
void set_user_ptrs(PANEL **panels, int n)
{	PANEL_DATA *ptrs;
	WINDOW *win;
	int x, y, w, h, i;
	char temp[80];
	
	ptrs = (PANEL_DATA *)calloc(n, sizeof(PANEL_DATA));

	for(i = 0;i < n; ++i)
	{	win = panel_window(panels[i]);
		getbegyx(win, y, x);
		getmaxyx(win, h, w);
		ptrs[i].x = x;
		ptrs[i].y = y;
		ptrs[i].w = w;
		ptrs[i].h = h;
		sprintf(temp, "Window Number %d", i + 1);
		strcpy(ptrs[i].label, temp);
		ptrs[i].label_color = i + 1;
		if(i + 1 == n)
			ptrs[i].next = panels[0];
		else
			ptrs[i].next = panels[i + 1];
		set_panel_userptr(panels[i], &ptrs[i]);
	}
}

/* Show the window with a border and a label */
void win_show(WINDOW *win, char *label, int label_color)
{	int startx, starty, height, width;

	getbegyx(win, starty, startx);
	getmaxyx(win, height, width);

	box(win, 0, 0);
	mvwaddch(win, 2, 0, ACS_LTEE); 
	mvwhline(win, 2, 1, ACS_HLINE, width - 2); 
	mvwaddch(win, 2, width - 1, ACS_RTEE); 
	
	print_in_middle(win, 1, 0, width, label, COLOR_PAIR(label_color));
}

void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color)
{	int length, x, y;
	float temp;

	if(win == NULL)
		win = stdscr;
	getyx(win, y, x);
	if(startx != 0)
		x = startx;
	if(starty != 0)
		y = starty;
	if(width == 0)
		width = 80;

	length = strlen(string);
	temp = (width - length)/ 2;
	x = startx + (int)temp;
	wattron(win, color);
	mvwprintw(win, y, x, "%s", string);
	wattroff(win, color);
	refresh();
}

Concentrate on the main while loop. Once it finds out the type of key pressed, it takes appropriate action. If 'r' is pressed resizing mode is started. After this the new sizes are updated as the user presses the arrow keys. When the user presses <ENTER> present selection ends and panel is resized by using the concept explained. While in resizing mode the program doesn't show how the window is getting resized. It's left as an exercise to the reader to print a dotted border while it gets resized to a new position.

When the user presses 'm' the move mode starts. This is a bit simpler than resizing. As the arrow keys are pressed the new position is updated and pressing of <ENTER> causes the panel to be moved by calling the function move_panel().

In this program the user data which is represented as PANEL_DATA, plays very important role in finding the associated information with a panel. As written in the comments, the PANEL_DATA stores the panel sizes, label, label color and a pointer to the next panel in the cycle.

16.6. Hiding and Showing Panels

A Panel can be hidden by using the function hide_panel(). This function merely removes it form the stack of panels, thus hiding it on the screen once you do update_panels() and doupdate(). It doesn't destroy the PANEL structure associated with the hidden panel. It can be shown again by using the show_panel() function.

The following program shows the hiding of panels. Press 'a' or 'b' or 'c' to show or hide first, second and third windows respectively. It uses a user data with a small variable hide, which keeps track of whether the window is hidden or not. For some reason the function panel_hidden() which tells whether a panel is hidden or not is not working. A bug report was also presented by Michael Andres here

#include <panel.h>

typedef struct _PANEL_DATA {
	int hide;	/* TRUE if panel is hidden */
}PANEL_DATA;

#define NLINES 10
#define NCOLS 40

void init_wins(WINDOW **wins, int n);
void win_show(WINDOW *win, char *label, int label_color);
void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color);

int main()
{	WINDOW *my_wins[3];
	PANEL  *my_panels[3];
	PANEL_DATA panel_datas[3];
	PANEL_DATA *temp;
	int ch;

	/* Initialize curses */
	initscr();
	start_color();
	cbreak();
	noecho();
	keypad(stdscr, TRUE);

	/* Initialize all the colors */
	init_pair(1, COLOR_RED, COLOR_BLACK);
	init_pair(2, COLOR_GREEN, COLOR_BLACK);
	init_pair(3, COLOR_BLUE, COLOR_BLACK);
	init_pair(4, COLOR_CYAN, COLOR_BLACK);

	init_wins(my_wins, 3);
	
	/* Attach a panel to each window */ 	/* Order is bottom up */
	my_panels[0] = new_panel(my_wins[0]); 	/* Push 0, order: stdscr-0 */
	my_panels[1] = new_panel(my_wins[1]); 	/* Push 1, order: stdscr-0-1 */
	my_panels[2] = new_panel(my_wins[2]); 	/* Push 2, order: stdscr-0-1-2 */

	/* Initialize panel datas saying that nothing is hidden */
	panel_datas[0].hide = FALSE;
	panel_datas[1].hide = FALSE;
	panel_datas[2].hide = FALSE;

	set_panel_userptr(my_panels[0], &panel_datas[0]);
	set_panel_userptr(my_panels[1], &panel_datas[1]);
	set_panel_userptr(my_panels[2], &panel_datas[2]);

	/* Update the stacking order. 2nd panel will be on top */
	update_panels();

	/* Show it on the screen */
	attron(COLOR_PAIR(4));
	mvprintw(LINES - 3, 0, "Show or Hide a window with 'a'(first window)  'b'(Second Window)  'c'(Third Window)");
	mvprintw(LINES - 2, 0, "F1 to Exit");

	attroff(COLOR_PAIR(4));
	doupdate();
	
	while((ch = getch()) != KEY_F(1))
	{	switch(ch)
		{	case 'a':			
				temp = (PANEL_DATA *)panel_userptr(my_panels[0]);
				if(temp->hide == FALSE)
				{	hide_panel(my_panels[0]);
					temp->hide = TRUE;
				}
				else
				{	show_panel(my_panels[0]);
					temp->hide = FALSE;
				}
				break;
			case 'b':
				temp = (PANEL_DATA *)panel_userptr(my_panels[1]);
				if(temp->hide == FALSE)
				{	hide_panel(my_panels[1]);
					temp->hide = TRUE;
				}
				else
				{	show_panel(my_panels[1]);
					temp->hide = FALSE;
				}
				break;
			case 'c':
				temp = (PANEL_DATA *)panel_userptr(my_panels[2]);
				if(temp->hide == FALSE)
				{	hide_panel(my_panels[2]);
					temp->hide = TRUE;
				}
				else
				{	show_panel(my_panels[2]);
					temp->hide = FALSE;
				}
				break;
		}
		update_panels();
		doupdate();
	}
	endwin();
	return 0;
}

/* Put all the windows */
void init_wins(WINDOW **wins, int n)
{	int x, y, i;
	char label[80];

	y = 2;
	x = 10;
	for(i = 0; i < n; ++i)
	{	wins[i] = newwin(NLINES, NCOLS, y, x);
		sprintf(label, "Window Number %d", i + 1);
		win_show(wins[i], label, i + 1);
		y += 3;
		x += 7;
	}
}

/* Show the window with a border and a label */
void win_show(WINDOW *win, char *label, int label_color)
{	int startx, starty, height, width;

	getbegyx(win, starty, startx);
	getmaxyx(win, height, width);

	box(win, 0, 0);
	mvwaddch(win, 2, 0, ACS_LTEE); 
	mvwhline(win, 2, 1, ACS_HLINE, width - 2); 
	mvwaddch(win, 2, width - 1, ACS_RTEE); 
	
	print_in_middle(win, 1, 0, width, label, COLOR_PAIR(label_color));
}

void print_in_middle(WINDOW *win, int starty, int startx, int width, char *string, chtype color)
{	int length, x, y;
	float temp;

	if(win == NULL)
		win = stdscr;
	getyx(win, y, x);
	if(startx != 0)
		x = startx;
	if(starty != 0)
		y = starty;
	if(width == 0)
		width = 80;

	length = strlen(string);
	temp = (width - length)/ 2;
	x = startx + (int)temp;
	wattron(win, color);
	mvwprintw(win, y, x, "%s", string);
	wattroff(win, color);
	refresh();
}

16.7. panel_above() and panel_below() Functions

The functions panel_above() and panel_below() can be used to find out the panel above and below a panel. If the argument to these functions is NULL, then they return a pointer to bottom panel and top panel respectively.

17.1. The Basics

To create menus, you first create items, and then post the menu to the display. After that, all the processing of user responses is done in an elegant function menu_driver() which is the work horse of any menu program.

The general flow of control of a menu program looks like this.

1. Initialize curses

2. Create items using new_item(). You can specify a name and description for the items.

3. Create the menu with new_menu() by specifying the items to be attached with.

4. Post the menu with menu_post() and refresh the screen.

5. Process the user requests with a loop and do necessary updates to menu with menu_driver.

6. Unpost the menu with menu_unpost()

7. Free the memory allocated to menu by free_menu()

8. Free the memory allocated to the items with free_item()

9. End curses

Let's see a program which prints a simple menu and updates the current selection with up, down arrows.

17.2. Compiling With the Menu Library

To use menu library functions, you have to include menu.h and to link the program with menu library the flag -lmenu should be added along with -lncurses in that order.

    #include <menu.h>
    .
    .
    .

    compile and link: gcc <program file> -lmenu -lncurses

#include <curses.h>
#include <menu.h>

#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
#define CTRLD 	4

char *choices[] = {
                        "Choice 1",
                        "Choice 2",
                        "Choice 3",
                        "Choice 4",
                        "Exit",
                  };

int main()
{	ITEM **my_items;
	int c;				
	MENU *my_menu;
	int n_choices, i;
	ITEM *cur_item;
	
	
	initscr();
	cbreak();
	noecho();
	keypad(stdscr, TRUE);
	
	n_choices = ARRAY_SIZE(choices);
	my_items = (ITEM **)calloc(n_choices + 1, sizeof(ITEM *));

	for(i = 0; i < n_choices; ++i)
	        my_items[i] = new_item(choices[i], choices[i]);
	my_items[n_choices] = (ITEM *)NULL;

	my_menu = new_menu((ITEM **)my_items);
	mvprintw(LINES - 2, 0, "F1 to Exit");
	post_menu(my_menu);
	refresh();

	while((c = getch()) != KEY_F(1))
	{   switch(c)
	    {	case KEY_DOWN:
		        menu_driver(my_menu, REQ_DOWN_ITEM);
				break;
			case KEY_UP:
				menu_driver(my_menu, REQ_UP_ITEM);
				break;
		}
	}	

	free_item(my_items[0]);
	free_item(my_items[1]);
	free_menu(my_menu);
	endwin();
}
	

This program demonstrates the basic concepts involved in creating a menu using menus library. First we create the items using new_item() and then attach them to the menu with new_menu() function. After posting the menu and refreshing the screen, the main processing loop starts. It reads user input and takes corresponding action. The function menu_driver() is the main work horse of the menu system. The second parameter to this function tells what's to be done with the menu. According to the parameter, menu_driver() does the corresponding task. The value can be either a menu navigational request, an ascii character, or a KEY_MOUSE special key associated with a mouse event.

The menu_driver accepts following navigational requests.

REQ_LEFT_ITEM Move left to an item. REQ_RIGHT_ITEM Move right to an item. REQ_UP_ITEM Move up to an item. REQ_DOWN_ITEM Move down to an item. REQ_SCR_ULINE Scroll up a line. REQ_SCR_DLINE Scroll down a line. REQ_SCR_DPAGE Scroll down a page. REQ_SCR_UPAGE Scroll up a page. REQ_FIRST_ITEM Move to the first item. REQ_LAST_ITEM Move to the last item. REQ_NEXT_ITEM Move to the next item. REQ_PREV_ITEM Move to the previous item. REQ_TOGGLE_ITEM Select/deselect an item. REQ_CLEAR_PATTERN Clear the menu pattern buffer. REQ_BACK_PATTERN Delete the previous character from the pattern buffer. REQ_NEXT_MATCH Move to the next item matching the pattern match. REQ_PREV_MATCH Move to the previous item matching the pattern match.

Don't get overwhelmed by the number of options. We will see them slowly one after another. The options of interest in this example are REQ_UP_ITEM and REQ_DOWN_ITEM. These two options when passed to menu_driver, menu driver updates the current item to one item up or down respectively.

17.3. Menu Driver: The work horse of the menu system

As you have seen in the above example, menu_driver plays an important role in updating the menu. It is very important to understand various options it takes and what they do. As explained above, the secon